Introductory Offer - Save $100 thru March 31, 2026.
 
The adapter makes your Kubota V2203 look like the back of a Modular V8 (i.e., Coyote 5.0, 4.6L, etc). The crank adapter uses the 4.6L "6-bolt" crank pattern. The Coyote uses an 8-bolt pattern, so be sure you source the correct 6-bolt flexplate if using an automatic transmission or flywheel if using a manual. The aluminum adapter plate is 1.5" thick. All factory Ford parts are used, including starter. And, there are lots of aftermarket clockable and varying KW starter options!
 
The 6R80 is what most people want, but there’s a long list of other transmissions, both automatic and manual. There's currently (1) 6R80 controller available, but another is on its way. There are also at least (2) 10R80 controllers out there.
 
This kit works with the Kubota 03-Series (example, V2203, V2403, etc.). The main target of this adapter is the Kubota V2203.
 
Be aware that Ecoboosts also used a 6R80/10R80, but are incompatible since they don't have the Modular V8 pattern.
 
This kit comes with:
Bellhousing Adapter Plate (anodized orange)
Crankshaft Adapter (zinc plated)
Hardware to mount to engine
 
You Supply:
Ford Dust Shield
Flexplate or Flywheel and applicable hardware & components from there back
Ford Starter