Kubota RTV-X1100C Tie Rod Wrench
 
These are laser-cut 3/16" steel wrenches. The tie rod bolts to the hydraulic steering cylinder, but there is only 3/16" width of clearance for each wrench flat. Instead of grinding down an expensive wrench, I decided to laser cut some purpose-built custom wrenches. These also fit the wrench flats tighter than standard wrenches, as the wrench flats are about 0.5mm narrower than a standard wrench.
 
This is for the sale of 1 wrench. You can cut it in half and have 2 wrenches. There is no guarantee the smaller wrench will stand up to the task if red loctite was used on the threads. If red loctite wasn't used, the smaller wrench works great. If it was used, you'll want to find a cheap 7/8" wrench and grind it down to below 0.24".