top of page

Forum Posts

Joe Peterson
Aug 22, 2022
In OM617 Swaps
Here is the in-depth write-up that I hope can serve as a how-to for OM617-swapping 96-04 Tacomas/4Runners (and T100's). I picked up this $600 1997 4Runner 5VZ/A340 4x4 (rear e-locker) with roughly 250k miles and it was SHOT! Completely rusted out even though the body doesn't show it. Destroyed interior. Radiator blew up and mixed trans fluid with coolant to make a milkshake in the trans. Now I haven't read a single report of anyone flushing their trans and successfully driving it after that. Even the ones done under warranty at the dealership with the power flush had trans failure shortly after. Keep an eye on your radiator if you've got an automatic! The PO claims he noticed it right away and had it towed home where I picked it up. I flush the trans, added a new radiator, and put another 30k on the 5VZ! I daily drove it to work, used it to tow the mower trailer around, and even drove it 3 hours into Iowa with the trailer to get a band saw. Did a fair amount of wheeling with it, too, enjoying the rear locker. Eventually, it started losing coolant, so the 5VZ got yanked and sold. The plan for this has always been for R&D. The only money I have into this rig is the new radiator and mounting the free tires someone was throwing away. Sold the 5VZ to cover the purchase. Can't beat that! I'm currently swapping in an OM617. I'll be using the 4Reigner to test trails I'm cutting in our pasture, as well as haul the tree cutting equipment around. Since the frame is already falling apart, I don't expect to keep this around much longer. I had originally planned to do a TDI swap after the 617, but have since decided not to worry about making TDI adapters for the Toyota Automatics, as the torque converter pilot stub would require turning down, and that is probably too much effort for most people. Once the frame folds in half, I'll pull the 617 back out to go into something long-term, and I'll save the rear axle and trans.
Project 4Reigner content media
1
50
1k
Joe Peterson
Dec 18, 2018
In OM617 Swaps
It’s good to have you here! Feel free to share anything - stories, ideas, pictures or whatever is on your mind. Here you can start discussions, connect with members, reply to comments, and more. Have something to say? Leave a comment or share a post!
Welcome to the Forum! content media
0
0
76

Joe Peterson

Admin
More actions
bottom of page